Kiosk Geometry Engine

Calculate equal gaps, kiosk centerline marks, and constant mounting height for wall prep inside a dedicated deployment layout terminal.

Wall kiosk presets

Inputs

Example: 180, 180.5, or 180 1/2
Used to scale the layout preview vertically against the kiosk height.
You can enter decimals or fractions like 17 3/4.
You can enter decimals or fractions like 8 7/8.
You can enter decimals or fractions like 47 or 60 1/2.
How this app works:
It assumes equal gaps everywhere, including both end margins. It gives you the centerline marks you should place on the wall. Then you line up the template center marker to each centerline and place the top of the template at the preset template height from finished floor.

Results

Gap width
—
Centerline pitch
—
First centerline
—
Template top height
—
Wall height
—
Enter your wall size and kiosk count, then click Calculate layout.

Centerline marks from the left wall

Kiosk Centerline mark Template top height
No calculation yet.

Simple field steps

  1. Measure wall width.
  2. Enter values into the calculator.
  3. Use the centerline marks shown here.

Formula used

Gap width = (Wall width - (Kiosk count × Kiosk width)) ÷ (Kiosk count + 1)

Quick notes

  1. Equal gaps means the left end gap and right end gap match the gaps between kiosks.
  2. The first gap only gets you to the edge of kiosk 1.
  3. Adding the center offset converts that to the first kiosk centerline.
  4. After that, each next centerline is one kiosk width plus one gap away.
  5. Mount the template using its center marker on each centerline.

Wall layout preview

Wall Equal gaps Kiosks Centerlines